Corepad Skatez AIR for Zowie EC-DW Series: Fit and Glide Guide

By Lethal Gaming Gear | Published: 2026-11-04

Category: How-to Guides

A step-by-step guide to installing Corepad Skatez AIR on Zowie EC1-DW, EC2-DW, and EC3-DW mice, with fit checks and glide expectations.

Quick answer

Use Corepad Skatez AIR made for the Zowie EC-DW series, remove the original feet cleanly, and align the new skates before pressing them down. The AIR series runs slightly faster than Corepad PRO, so expect a quicker glide.

Why the AIR series changes the feel

Corepad Skatez AIR have raised points that reduce the contact surface, which lowers friction compared with the regular PRO series. That makes them a good match if you want a faster, more effortless glide from your EC-DW mouse, but it also means you will feel the surface texture more. If you prefer a slower, more controlled feel, the PRO series may suit you better.

The AIR skates are precision-made replacement feet for gamers and advanced users, so they are designed to fit specific mouse models. For the EC-DW series, choose the version listed for EC1-DW, EC2-DW, or EC3-DW to ensure the shape matches your mouse base.

When to replace your EC-DW feet

Original mouse feet wear down over time, and you may notice a scratchy or inconsistent glide, or visible flat spots. If you have already cleaned the mouse pad and the sensor lens, and the glide still feels uneven, new skates are a sensible next step. Installing Corepad AIR skates can also be a way to change the glide speed without changing mice.

Keep in mind that the EC-DW series has a specific base shape, so universal dots or skates for other models may not align perfectly. The Corepad Skatez AIR for EC-DW are shaped for these mice, which reduces the risk of edge catching.

Step-by-step installation

Remove the old feet: Use a plastic tool or your fingernail to lift the edge of each original foot, then peel it off slowly. Do not use metal tools, which can scratch the mouse base. Check that no adhesive residue remains; a clean base is essential for the new skates to sit flat.
Clean the base: Wipe the base with isopropyl alcohol on a lint-free cloth and let it dry completely. Any oil or dust will weaken the new adhesive. Wait until the surface is fully dry before applying new skates.
Test-fit the new skates: Place the Corepad Skatez AIR on the base without removing the backing paper to confirm the shape and orientation. The raised points should face away from the mouse. If the skate does not sit flush, check that you have the correct model for your EC-DW variant.
Apply and press firmly: Peel the backing and set each skate in place, then press down evenly for about 10 seconds. Avoid touching the adhesive side with your fingers. Press from the center outward to push out any air bubbles.
Let the adhesive set: Wait at least 30 minutes before heavy use so the adhesive can bond. You can use the mouse lightly, but avoid aggressive swipes. If a skate lifts at the edge, press it down again while the adhesive is still fresh.

Product facts

Corepad Skatez AIR - Zowie EC1-DW / EC2-DW / EC3-DW: Corepad Skatez AIR have raised points that reduce the contact surface and lower friction, making them slightly faster than the regular PRO series. If you want a quicker glide from your EC-DW mouse, AIR is the faster option; choose PRO if you prefer more control.
Corepad Skatez AIR - Zowie EC1-DW / EC2-DW / EC3-DW