Esports Tiger Arc 2 for Zowie FK1: Fit and Performance Guide

Quick Answer

The Esports Tiger Arc 2 skates fit the Zowie FK1 precisely and provide a smooth, consistent glide. Follow these steps for a clean installation and optimal performance.

Installation Steps

1. Remove Old Skates: Use a plastic spudger or a thin guitar pick to gently lift the edge of each old skate. Apply steady, even pressure to avoid bending the skate. Peel slowly to minimize adhesive residue. Do not use a metal tool—it can scratch the mouse base.
2. Clean the Surface: Wipe the skate recesses with a microfiber cloth and a drop of isopropyl alcohol (70% or higher). Remove all glue residue and dust. Let the surface dry completely for 2-3 minutes. Any leftover adhesive will prevent the new skates from sitting flat, causing uneven glide.
3. Align the Arc 2 Skates: Peel the backing from one skate and align it with the screw hole and edge contours of the FK1 base. Press the center first, then work outward to avoid air bubbles. Repeat for all skates. Check alignment before pressing firmly—once the adhesive sticks, repositioning can weaken the bond.
4. Break In the Skates: Place the mouse on your mousepad and move it in figure-eight patterns for 5-10 minutes. This helps the PTFE material settle and removes any initial roughness from the edges. The glide will feel slightly slower for the first hour; this is normal and improves with use.

Product Facts

• Esports Tiger Arc 2 - Zowie AM / FK1 / FK1+ / FK2 / S1 / S2 / ZA11 / ZA12 / Ducky Feather: Reinforced Arc 2 Proprietary PTFE Material for improved glide over Arc The material upgrade means you get a smoother, more controlled glide compared to standard PTFE skates, which helps with precise tracking in FPS games.