Zurück zum Blog
Produktbewertungen 2026-11-18 Lethal Gaming Gear 0 Aufrufe

Corepad Skatez for Cooler Master MM720: Fit and Glide FAQ

Corepad Skatez for Cooler Master MM720: Fit and Glide FAQ

Straight answers on Corepad Skatez fit for the Cooler Master MM720, what's in the pack, the 0.7mm PTFE and 3M adhesive, and what the listing does and doesn't confirm.

Fit and compatibility questions

Are these Skatez actually made for the Cooler Master MM720?
Yes. The product is listed as Corepad Skatez - Cooler Master MM720, so the set is intended for that mouse model rather than a universal sheet you trim yourself. The supplied record does not include a separate model-number compatibility table, so the model name in the listing is the fit evidence you have.
Do I get one set of feet or two?
One pack contains 2 sets of Skatez. That gives you a spare set for a later replacement, or a second attempt if a first install does not go as planned. It does not change the fit; each set is cut for the MM720.
Will these fit any other Cooler Master mouse?
The supplied information does not confirm compatibility with any model other than the MM720. Do not assume a set cut for the MM720 will line up on another shell. If you need feet for a different mouse, look for a listing that names that model.

What the catalog confirms about the MM720 set

  • Corepad Skatez - Cooler Master MM720: 1 pack contains 2 sets of Skatez. You are buying two installs' worth of feet, which matters if you expect to replace them again later.
    Corepad Skatez - Cooler Master MM720
    Corepad Skatez - Cooler Master MM720
  • Corepad Skatez - Cooler Master MM720: Corepad Skatez consists of 100% pure quality PTFE. PTFE is the contact material that determines how the mouse slides, so this is the core of the glide question.
  • Corepad Skatez - Cooler Master MM720: Thickness: 0.7mm This is the only thickness figure supplied for this set, so treat it as the reference point when comparing with stock feet or other Skatez versions.
  • Corepad Skatez - Cooler Master MM720: Corepad Skatez use high-quality 3M adhesive. The adhesive is what holds the PTFE to the MM720 base, so it is the part that matters most during installation.

Glide and feel questions

What does the MM720 glide feel like with these Skatez?
The supplied record does not describe a specific glide speed or feel for this set. What it does confirm is 100% pure PTFE at 0.7mm, which is the material and thickness you are actually installing. How that translates to friction depends on your mouse pad and the condition of your current feet, and the listing does not make a speed claim.
How does 0.7mm compare with the stock MM720 feet?
The supplied information does not include the stock foot thickness, so a direct before-and-after measurement is not possible from this record. Use 0.7mm as the known figure for the Corepad set and check your own mouse if the difference matters to you.
Is thicker or thinner better for glide?
The catalog does not present 0.7mm as better or worse than another thickness. It is simply the thickness of this set. Avoid treating the number as a performance rating; the material and how cleanly the feet sit on the base are the practical factors.

Installation and care questions

How do I install the Skatez on the MM720?
The supplied record includes no preparation or operating steps, so this article will not invent a procedure. What you can rely on is that the set uses 3M adhesive and is cut for the MM720. Follow any instructions that come with the pack, and keep the spare set clean and flat until you need it.
Do I need to remove the old feet first?
The supplied information does not include a removal procedure. The listing confirms the Skatez are adhesive-backed replacement feet for the MM720, but it does not spell out a removal method, so use the approach you normally trust for your mouse rather than a step copied from an unrelated guide.
How should I care for PTFE feet?
The record confirms the material is 100% pure PTFE but gives no cleaning or care instructions. Keep the feet free of grit and avoid dragging the mouse over a dirty surface; beyond that, the supplied information does not set a care routine.
How often will I need to replace them?
No replacement interval is supplied. The pack includes 2 sets, which gives you one spare, but the record does not state how long a set lasts. Wear depends on your pad and use, so treat the second set as a buffer rather than a schedule.

The honest limits of this listing

This is a focused set: Corepad Skatez cut for the Cooler Master MM720, 0.7mm PTFE with 3M adhesive, two sets per pack. The catalog does not confirm compatibility with other mice, does not describe a glide speed, and does not include installation or care steps. If you need those details, they are not in the supplied record, and guessing them would not help you install the feet correctly.

What you can decide from the evidence is simpler: whether you want a spare set of PTFE feet for your MM720 at 0.7mm. If yes, the listing gives you the material, the thickness, the adhesive type and the quantity. If you need a guaranteed fit for a different model or a documented install procedure, this record does not provide it.

Verwandte Artikel

Customer Service
Startseite
Produkte
Warenkorb
Profil