Esports Tiger Kryos for GPX Superlight 2 DEX: Glide Guide
By Lethal Gaming Gear | Published: 2026-10-27
Category: Product Reviews
Learn how to install Esports Tiger Kryos Ice Edition mouse skates on your Logitech G Pro X Superlight 2 DEX for ultra-smooth glide and precise control.
Quick answer
The Esports Tiger Kryos Ice Edition for the Logitech G Pro X Superlight 2 DEX delivers an ultra-smooth, low-friction glide thanks to its pure PTFE material. Follow these steps to install them correctly and avoid common mistakes.
Why choose the Kryos Ice Edition for the Superlight 2 DEX
The Esports Tiger Kryos continues the legacy of the classic Ice skates, using ultra-pure PTFE that naturally minimizes resistance. For the Superlight 2 DEX, this means a consistent, ice-like glide that feels both fast and controlled—ideal for flick shots and tracking.
One trade-off: the ultra-smooth surface can feel slippery if you're used to more textured skates. You may need a short adjustment period for precise micro-adjustments.
How to install Esports Tiger Kryos on Superlight 2 DEX
- Remove old skates completely: Use a plastic spudger or your fingernail to lift the edge of the existing skates. Peel them off slowly—avoid metal tools that can scratch the mouse base. If adhesive residue remains, use a small piece of tape to dab it away. Any leftover adhesive will create an uneven surface, causing the new skates to wobble or feel inconsistent.
- Clean the skate recesses: Wipe the recessed areas with a microfiber cloth lightly dampened with isopropyl alcohol (70% or higher). Let the alcohol evaporate completely—about 30 seconds. Do not use water or household cleaners. Oil or dust trapped under the new skates will reduce glide smoothness and may cause premature wear.
- Align and press the Kryos skates: Peel the backing from one Kryos skate. Position it over the recess, aligning the edges carefully. Lower it straight down—do not slide it into place. Once seated, press firmly for 10 seconds, especially around the edges. Sliding the skate sideways can stretch the PTFE film, creating a permanent wrinkle that affects glide.
- Break in the skates on a soft pad: After installation, move the mouse on a clean cloth or soft mousepad for 2-3 minutes with moderate pressure. This helps the PTFE settle evenly without scratching the pad surface. Skipping the break-in can make the initial glide feel scratchy or inconsistent until the skates naturally wear in.
Product facts
- Esports Tiger Kryos - Logitech G Pro X Superlight2 DEX: Ice Edition Ultra-Pure PTFE Material with naturally low-friction properties delivers minimal resistance during movement. This gives you an ultra-smooth glide that reduces fatigue during long sessions while maintaining precise control for competitive play.
Esports Tiger Kryos - Logitech G Pro X Superlight2 DEX
