Silver Fox Dots for ATK Zero: Fit and Performance

Quick Answer

Silver Fox dots are a reliable drop-in upgrade for the ATK Zero, giving you a smoother glide and quieter movement, especially on glass pads. Follow the steps below to install them without lifting or uneven wear.

Step-by-Step Installation

1. Clean the underside thoroughly: Remove the old skates and any adhesive residue. Wipe the base with isopropyl alcohol and let it dry completely. Check that no residue remains; leftover adhesive can cause dots to sit unevenly.
2. Plan the dot layout: Place dots symmetrically around the sensor and at each corner. Use a reference image of the ATK Zero's base if needed to match the original skate positions. Ensure the sensor area is clear of dots to avoid interference with tracking.
3. Apply the dots: Peel each dot and press it firmly into place. Start from the center and press outward to avoid air bubbles. Avoid touching the adhesive side; oils from your fingers can reduce stickiness.
4. Let the adhesive set: Wait at least 10 minutes before using the mouse. For best results, leave it overnight so the dots bond fully. If a dot lifts, remove it and reapply with a new one rather than pressing it back down.

Product Facts

• Silver Fox - ATK Zero: The Silver Fox Black PRO is engineered for a quieter glide, making it ideal especially for glass mouse pads, where standard PTFE skates can sometimes produce more noise. If you use a glass pad, these dots reduce noise without sacrificing the smooth feel, so you can focus on your game.