X-Ray Cable USB-A to USB-C: Detachable Connector Setup FAQ

By Lethal Gaming Gear | Published: 2026-10-31

Category: How-to Guides

Get clear answers on setting up the X-Ray USB-A to USB-C cable, using its detachable connector, and deciding when a replacement makes sense for your mouse.

Quick answer

Connect the USB-C end to your mouse and the USB-A end to your PC, then use the detachable connector only when you need to swap or route the cable. If the cable is damaged at the connector, replace the cable rather than forcing a repair.

Why the detachable connector changes cable routing

A detachable connector lets you separate the cable at the mouse end without pulling the whole run back through your desk. That matters most if your USB-A port is hard to reach or your cable is routed through a cable channel.

The trade-off is one more connection point to check. If the mouse disconnects intermittently, reseat the detachable joint before assuming the mouse or port is faulty.

When a cable connector replacement is the right call

Replace the cable when the connector housing is cracked, the detachable joint no longer clicks or holds firmly, or the cable cuts out only when you move the connector. These are signs of connector wear, not settings problems.

Do not replace the cable for a loose USB-A port or a mouse that disconnects in only one application; test another port and another cable first.

X-Ray USB-A to USB-C setup FAQ

Which end goes where?: Plug the USB-C end into the mouse and the USB-A end into your computer. The detachable connector sits at the mouse end, so route the cable before joining it.
How do I connect the detachable joint?: Align the two halves of the detachable connector and push straight in until they seat. Do not twist or force the joint; if it does not seat easily, check for debris or a bent pin.
Can I unplug the mouse end without removing the USB-A end?: Yes. The detachable connector is designed to separate at the mouse end, so you can leave the USB-A end plugged into your PC while you swap or reroute the cable.
Why does my mouse disconnect when I move the cable?: Reseat the detachable joint first, then try a different USB-A port. If the disconnects continue only when the connector moves, the cable connector is likely worn and should be replaced. Test the joint and port before buying a replacement.
Do I need a paracord mouse cable install for this cable?: No. The X-Ray cable is a complete USB-A to USB-C cable with a detachable connector. A paracord install refers to sleeving a bare cable; this cable does not require that process.

Product facts

X-Ray Cable [USB-A to USB-C with Detachable Connector] 1B A-C: Translucent silicone cabling with white shielding and conductors, plus USB shells CNC crafted from a custom copper alloy with a matte silver PVD finish. The visible cable and metal shells make it easier to spot damage or wear at the connector before it causes dropouts.
X-Ray Cable [USB-A to USB-C with Detachable Connector] 1B A-C
X-Ray Cable [USB-A to USB-C with Detachable Connector] 1B A-C: The connectors have a knurled grip, and the slim silhouette is designed for compatibility with various keyboards. The grip helps when inserting or removing the detachable end, and the slim profile reduces fit problems in tight keyboard ports.