Corepad Skatez for Cooler Master MM730/MM731: Fit Guide
By Lethal Gaming Gear | Published: 2026-10-30
Category: How-to Guides
Learn how to install Corepad Skatez on your Cooler Master MM730 or MM731 mouse. Step-by-step instructions for a secure fit and smooth glide.
Quick answer
Corepad Skatez for Cooler Master MM730/MM731 fit the stock feet perfectly. Follow these steps to install them for a secure, low-friction glide.
Why Skatez instead of new feet?
Replacing the stock skates on your MM730 or MM731 with Corepad Skatez is a simple upgrade that reduces friction without changing the mouse's balance. The 0.8mm PTFE material glides smoothly on most surfaces, and the high-quality 3M adhesive ensures they stay put.
Installation steps
- Clean the stock skate area: Remove the existing skates from your MM730 or MM731. Wipe the recessed area with isopropyl alcohol to remove any adhesive residue or grease. A clean surface is critical for the 3M adhesive to bond properly.
- Peel and align the Corepad Skatez: Peel the backing from one Corepad Skatez set. Align it with the front edge of the stock skate recess and press down firmly. Repeat for the rear skate. Make sure the skate is centered; misalignment can cause uneven wear.
- Press and cure the adhesive: Apply even pressure across the entire skate for about 30 seconds. Let the mouse sit unused for at least 1 hour to allow the adhesive to set fully. Skipping the curing time may cause the skates to lift during use.
Product facts
- Corepad Skatez - Cooler Master MM730 / MM731: Corepad Skatez are 0.8mm thick and made from 100% pure quality PTFE with a high-quality 3M adhesive. The thin profile keeps the mouse's original height and feel, while the strong adhesive prevents peeling during intense gaming sessions.
Corepad Skatez - Cooler Master MM730 / MM731
