Corepad Skatez for Razer Mamba Wireless 2018: Glide & Fit
By Lethal Gaming Gear | Published: 2026-10-30
Category: How-to Guides
Learn how to replace the mouse feet on your Razer Mamba Wireless 2018 with Corepad Skatez for a smooth, consistent glide. Step-by-step installation tips included.
Quick answer
Yes, Corepad Skatez for the Razer Mamba Wireless 2018 are a drop-in replacement for the stock feet. They use pure PTFE and a 3M adhesive, so you get a smooth, consistent glide without needing to modify your mouse.
Why replace the stock feet?
The stock feet on the Razer Mamba Wireless 2018 wear down over time, creating drag and inconsistent movement. Replacing them with Corepad Skatez restores a smooth glide and can improve your aim consistency, especially in fast-paced games.
Corepad Skatez are made from 100% pure PTFE, which is the same material used in high-end aftermarket skates. The 0.6mm thickness is close to the original, so you shouldn't notice any change in sensor height or lift-off distance.
What to expect during installation
The installation process is straightforward, but it requires patience. The adhesive is strong, so you need to clean the surface thoroughly before applying the new skates. Avoid touching the adhesive with your fingers, as oils can reduce bonding.
If you're coming from worn-out feet, you may notice a slight break-in period. The glide will feel faster at first, but it will stabilize after a few hours of use.
Step-by-step installation
- Prepare your workspace: Clean your desk and have a soft cloth or mousepad ready. Ensure you have a small screwdriver or plastic pry tool to remove the old feet. A clean surface prevents dust from getting under the new skates.
- Remove the old feet: Carefully peel off the old skates using a plastic tool or your fingernail. If they resist, use a hairdryer on low heat to soften the adhesive. Avoid using metal tools that could scratch the mouse. Don't rush—damaging the mouse base can affect sensor performance.
- Clean the skate recesses: Use a cotton swab with isopropyl alcohol to remove any adhesive residue and dust. Let the surface dry completely before proceeding. Residual adhesive can cause the new skates to sit unevenly, leading to wobble.
- Apply the new Corepad Skatez: Peel the backing off one skate and align it with the recess. Press down firmly from the center outward to ensure full contact. Repeat for all skates. Avoid touching the adhesive—oils from your skin can reduce bonding strength.
- Break in the skates: Place the mouse on your mousepad and move it in figure-eight patterns for a few minutes. This helps the PTFE settle and ensures even glide. If you notice any rough spots, check that the skates are fully seated.
Product facts
- Corepad Skatez - Razer Mamba Wireless 2018: Each pack contains 2 sets of Corepad Skatez, made from 100% pure PTFE with a 0.6mm thickness and a high-quality 3M adhesive. You get a spare set for future replacements, and the pure PTFE ensures a smooth, consistent glide that matches the original feel.
Corepad Skatez - Razer Mamba Wireless 2018
