Corepad Skatez for Pwnage Ultra Custom Symm 2: Fit Guide
By Lethal Gaming Gear | Published: 2026-10-24
Category: How-to Guides
Learn how to install Corepad Skatez on the Pwnage Ultra Custom Symm 2 or Xenics Titan GM Air Symmetric. Step-by-step instructions, tips, and common mistakes to avoid.
Quick Answer
Corepad Skatez for the Pwnage Ultra Custom Symm 2 (also compatible with the Xenics Titan GM Air Symmetric) are a direct drop-in replacement for the stock feet. Follow the steps below to swap them in about 10 minutes and enjoy a smoother glide.
Why Upgrade the Stock Skates?
Stock mouse feet are often thin and can wear down quickly, especially on hard pads. Corepad Skatez are made from 100% pure quality PTFE, which gives a consistent, low-friction glide that many gamers prefer for fast flicks and tracking.
The 0.8mm thickness of these skates is slightly thicker than many stock feet, which can help prevent the mouse body from scratching the pad if the recess for the feet is shallow. This is a common concern with wireless ultralight mice like the Pwnage Symm 2.
Compatibility Notes
This pack is designed for the Pwnage Ultra Custom Symm 2 and the Xenics Titan GM Air Symmetric. Both mice share the same shell shape, so the skate cutouts are identical. If you own a different mouse, check the shape and size of the skates before ordering.
The pack includes two sets of skates, so you get a spare set for future replacements or for a second mouse. This is a cost-effective option compared to buying single sets.
Installation Steps
- Prepare your workspace: Clean your mousepad area and have a soft cloth, isopropyl alcohol, and a plastic spudger or old credit card ready. Ensure your hands are clean and dry. A clean surface prevents dust from getting under the new skates.
- Remove the old skates: Gently lift the edge of each old skate with a spudger or your fingernail. Peel them off slowly to avoid damaging the mouse shell. If the adhesive is stubborn, use a hairdryer on low heat for a few seconds to soften it. Do not use a metal tool – you might scratch the mouse or the recess.
- Clean the skate recesses: Wipe the recesses with isopropyl alcohol to remove any adhesive residue and dust. Let them dry completely for about 2 minutes. Residual adhesive can cause the new skates to sit unevenly.
- Apply the new Corepad Skatez: Peel the backing off one skate and align it with the recess. Press down firmly from the center outward to ensure full adhesion. Repeat for all skates. Check that the skate is fully seated – no edges should be lifted.
- Let the adhesive set: Leave the mouse on a flat surface for at least 15 minutes before using it. This lets the 3M adhesive bond properly. Avoid sliding the mouse during this time to prevent shifting.
- Test the glide: Move the mouse on your pad. The glide should feel smoother and more consistent. If you notice any dragging, re-check the alignment. If the glide feels uneven, re-seat the skates by pressing them down again.
Product Facts
- Corepad Skatez - Pwnage Ultra Custom Symm 2 / Xenics Titan GM Air Symmetric: Corepad Skatez consist of 100% pure quality PTFE and use high-quality 3M adhesive. The pure PTFE ensures a smooth, consistent glide, and the 3M adhesive keeps the skates firmly attached during intense gaming sessions.
Corepad Skatez - Pwnage Ultra Custom Symm 2 / Xenics Titan GM Air Symmetric - Corepad Skatez - Pwnage Ultra Custom Symm 2 / Xenics Titan GM Air Symmetric: Thickness: 0.8mm. The slightly thicker skate can help prevent the mouse base from scraping on the mousepad, which is especially useful if your stock feet have worn down.
